Installing a 2 post car lift is a process that requires careful planning and precise execution to ensure safety and functionality. Here’s a detailed guide on how to install a 2 post car lift:
Choose the Right Location
Select a location in your garage or shop that can handle heavy loads. The floor must be concrete, at least 4 inches thick, and in good condition. Ensure there is enough overhead and side clearance around the lift.
Layout and Positioning
Position the two posts of the lift according to the manufacturer’s specifications. It’s crucial to align them perfectly to ensure the lift operates smoothly and safely. Use a plumb line and tape measure for accurate placement.
Anchor the Posts
Once positioned, mark the spots for drilling holes in the concrete for the anchors. Drill the holes using a hammer drill and a masonry bit that matches the size of the anchors. Clean out the holes to remove any debris.
Install the Posts
Lift each post into place, aligning it with the drilled holes. Insert the anchors and tighten them securely to fix the posts to the floor. Ensure the posts are vertical using a level.
Assemble the Overhead Beam
If your lift includes an overhead beam (common in symmetric lifts), install it according to the manufacturer’s instructions. This beam connects the two posts and helps stabilize the structure.
Electrical and Hydraulic Connections
Connect the hydraulic lines and electrical components as directed in the installation manual. Ensure all connections are tight and secure to prevent leaks and electrical issues.
Testing the Lift
Before using the lift with a vehicle, perform several tests. Raise and lower the lift without a load to ensure it operates smoothly. Check all safety features, such as the lock mechanism and limit switches, to ensure they function correctly.
Watch the video above to learn more!.
